Model 1024is a range of large displays with 3, 4, 5 or 6 digits and 100mm high red LED 7-segment displays. These units are factory configured for Serial (RS232 and RS485), BCD (parallel or multiplexed), Counts or Rate / Speed inputs. Enclosures may be IP54 acrylic, IP65 epoxy coated mild steel or IP66 stainless steel, with acrylic or safety glass viewing windows. Excitation is standard for 2-wire or 3-wire sensors and proximity switches. These instruments meet CE and C-Tick EMC and EMI and Low Voltage directives.
With the addition of our Radio Modem Transceiver, Model 1024 may be used as a remote display with Serial input from a computer, embedded controller or from any of the large range of Instrotech Indicators
100mm high LED, 3, 4, 5 or 6 digits for Serial, BCD, Counts or Frequency inputs
Model 1036is a large indicator with 100mm high digits designed for indoor or outdoor use with IP54 or IP65 environmental protection ratings. The housings may be acrylic, epoxy coated mild steel or stainless steel, with acrylic or safety glass viewing windows. There are variants with 3, 4, 5 or 6 digits to suit most analogue and digital signals.
The input type may be any of the functions of the large range of Instrotech digital indicator types. For further information and specifications, please review the Digital Indicators page, or Contact Us for more details about your application.
For all input and output options, hardware and firmware functions, please see Indicator - Options
Model 2001 is an LED module used singly or in multiples for large digital displays with RS232 Serial ASCII input. The digit height is 125mm and the LED's are ultrabright sunlight viewable types. Module 2001B is a similar LED digital display for BCD inputs. These modules are used in the Introtech 2000 Series large digit displays with the various inputs and numbers of digits listed above.
125mm high red LED 7-segment single digit for Serial ASCII input
3 digit 125mm high LED, Process, Temperature or Load Cell input for AC or DC supply
Series 2000is a range of extra-large 3 to 6 digit LED array displays with 125mm high digits. These models are designed to be used in most process, temperature and weighing applications where high visibility and distant viewing is required. Using high intensity wide-angle LED's in an IP65 enamelled steel housing ensures clear viewing distances of greater than 50 metres. For high ambient temperature conditions, an optional special coated glass window is available
Model 2802is a 4 digit indicator with 280mm high ultrabright digits designed for outdoor use in harsh environments such as mines and quarries. The housing is a sun-protected weatherproof epoxy coated housing size 1360 x 530mm with safety glass viewing window and heat reducing "tropical roof".
The input may be any of the functions of the range of the Instrotech 4 digit indicator types. These may be process, pulse, frequency, temperature, timing, load cell, serial or parallel inputs. For further details and specifications, please Contact Us.
4 digit 280mm high LED with the functions of any 4 digit indicator, Model 4xxx