Portable Hand-Held Display Calog-LC Display
Calog LC Display
is a hand-held portable load cell and strain gauge indicator with data-logging functions and real-time clock.
The long lasting Li-ion battery pack allows this instrument to be used where measurements need to be taken in varying locations for about 6 hours between re-charges. The Calog load cell display can also be powered from a battery-charger plug-pack, from an external 12 volt battery, or from a vehicle power outlet.
The Calog Load Cell Display may be set to read in units of Grams, Kilograms, Tonnes, Ounces, Pounds, Tons, Newtons or none with the corresponding mV's.
The long lasting Li-ion battery pack allows this instrument to be used where measurements need to be taken in varying locations for about 6 hours between re-charges. The Calog load cell display can also be powered from a battery-charger plug-pack, from an external 12 volt battery, or from a vehicle power outlet.
The Calog Load Cell Display may be set to read in units of Grams, Kilograms, Tonnes, Ounces, Pounds, Tons, Newtons or none with the corresponding mV's.
The 12mm plug-on locking cable-connector makes for quick and easy interchanging of load cells. Its small size, rugged design, light weight, protective boot and high precision makes this unit ideal for factory, transport, testing, research, therapy, fishing and farm use.
Features
- 2 year warranty, excluding batteries
- Fixed 5 VDC excitation for strain gauges
- Automatic or Manual Zero and Span calibration
- Powers 1 x 350 ohm or 3 x 1000 ohm load cells
- Logs weights with time and date and tag numbers
- 4-pin IP67 M12 A-coding male receptacle connector
- Tare, Peak Hold and Auto Zero maintenance functions
- Small, rugged, handheld with a protective rubber cover
- Display mass, force, strain or torque in engineering units
- Data logging in CSV format to SD card with USB interface
- Graphic display of measured value, mV's and battery status
- Meets EMC and EMI and Low Voltage directives
- Lithium Ion built-in long-life battery pack with 'fuel gauge' chip
- Full operating manual and factory calibration certificate included
- User programmable auto-off, audible keypad and display contrast
- Programmable Sensitivity, Range, Decimal point and Engineering Units
- Carry case, boot, battery charger, SD card and cable connector supplied
Specification
Measurement range -5 to +35 mVInput impedance 300 Ω minimumExcitation 5 VDC fixedAccuracy 0.01% of full scale Resolution 5 digits
Enquiry
Online shop
Calog portable Load Cell displayAU$ 1,257.00